Shenzhen KHJ Technology Co., Ltd marketing@khj.cn 86-0755-28102935
Here is the usage method of UV tape:
Prepare the Surface: Ensure that the surface to be bonded is clean, dry, and smooth. Remove any oil, dust, or other debris to ensure proper adhesion of the tape.
Cut the Tape: Using scissors or cutting tools, cut the UV tape to the desired size and shape.
Apply the Tape: Gently apply the cut UV tape onto the surface to be bonded. Ensure that the tape adheres fully to the surface, avoiding the formation of bubbles or gaps.
Exposure to UV Light: UV tape requires exposure to ultraviolet (UV) light to cure. Use a UV lamp or other UV light source to expose the applied tape. Determine the exposure time and distance based on the thickness of the tape and the required curing time. Typically, exposure for several seconds to minutes is sufficient for curing UV tape.
Check Curing: After exposure to UV light, check if the UV tape has cured properly. Cured tape should become firm and resistant to movement. If further curing is needed, continue to expose the tape to UV light.
Remove Excess Tape: If there is any excess or squeezed-out tape during application, use a scraper or other tool to remove it.
Post-cure Handling: Once the UV tape is fully cured, you can proceed with further processing, such as trimming edges or applying paint.
Note: Handle UV light sources with care to avoid direct exposure to skin and eyes. Additionally, ensure safe use of UV light sources to prevent any potential hazards.
